Molnar Technologies 302/351W Ford Specific Power Adder Rods

Molnar Technologies 302/351W Ford Specific Power Adder Rods

Molnar Power Adder H-Beam Connecting Rods are designed for serious Power Adder Applications. Chevy style connecting rod with the Ford specific tower offset.

Made from 4340 billet material
Heat treated to increase tensile strength and shot peened to increase fatigue life
Wear resistant bronze bushing for long wrist pin life
ARP2000 material bolts that are custom made for us
All MOLNAR TECHNOLOGIES connecting rods are finished here in the USA at our factory near Grand Rapids, Michigan.
Sizes are held to +/- .0001″ which are the tightest tolerances you will find in the racing industry!

5.400″, 6.200", 6.250", and 6.300" Center to Center Length
Small Block Ford Correct Tower Offset
Thicker beam Cross Section for Boost and Nitrous
Thicker H cross section also strengthen the Rod’s Beam Area
Big End Bore 2.225″ for 2.100″ Journal
Big End Width (5.400" rods are .831") ( 6.200" or longer are .940")
.927″ Pin
ARP2000 Bolts (5.400" have 3/8" bolts) (6.200" or longer have 7/16")